In this article, we are going to talk about JavaScript proxies which were introduced with JavaScript version ECMAScript 6 (ES6). We will use some of the existing ES6 syntax, including the spread operator in this article. So it will be helpful if you have some basic knowledge about ES6.

What is a Proxy?

JavaScript proxies have the ability to change the fundamental behavior of objects and functions. We can extend the language to better suit our requirements or simply use it for things like validation and access control on a property.

Until proxies were introduced, we did not have native level access to change the fundamental behavior of an object, nor a function. But with them, we have the ability to act as a middle layer, to change how the object should be accessed, generate information such as how many times a function has been called, etc.

Property Proxy Example

Let's start with a simple example to see proxies in action. To get started, let's create a person object with firstName, lastName, and age properties:

const person = { firstName: 'John', lastName: 'Doe', age: 21

Now let's create a simple proxy by passing it to the Proxy constructor. It accepts parameters called the target and the handler. Both of these will be elaborated shortly.

Let's first create a handler object:

const handler = { get(target, property) { console.log(`you have read the property ${property}`); return target[property]; }

This is how you can create a simple proxy:

const proxyPerson = new Proxy(person, handler); console.log(proxyPerson.firstName);

Running this code should yield:

you have read the property firstName
you have read the property lastName
you have read the property age

Each time you access a property of that proxy object you will get a console message with the property name. This is a very simple example of a JavaScript proxy. So using that example, let's get familiar with few terminologies.

Proxy Target

The first parameter, target, is the object that you have attached the proxy to. This object will be used by the proxy to store data, which means if you change the value of the target object the value of the proxy object will also change.

If you want to avoid this, you can pass the target directly to the proxy as an anonymous object, or you can use some encapsulation method in order to protect the original object by creating an Immediately-Invoked Function Expression (IIFE), or a singleton.

Just don't expose your object to the outside where the proxy will be used and everything should be fine.

A change in the original target object is still reflected in the proxy:

person.age = 20;
you have read the property age
you have read the property age

Proxy Handler

The second parameter to the Proxy constructor is the handler, which should be an object containing methods that describe the way you want to control the target's behavior. The methods inside this handler, for example the get() method, are called traps.

By defining a handler, such as the one we've defined in our earlier example, we can write custom logic for an object that otherwise doesn't implement it.

For example, you could create a proxy that updates a cache or database any time a property on the target object is updated.

Proxy Traps

The get() Trap

The get() trap fires when someone tries to access a specific property. In the previous example, we used this to print a sentence when the property was accessed.

As you may already know, JavaScript doesn't support private properties. So sometimes as a convention, developers use the underscore (_) in front of the property name, for example, _securityNumber, to identify it as a private property.

However, this does not actually enforce anything in the code level. Developers just know they should not directly access the properties that start with _. With proxies, we can change that.

Let's update our person object with a social security number in a property called _ssn:

const person = { firstName: 'John', lastName: 'Doe', age: 21, _ssn: '123-45-6789'

Now let's edit the get() trap to throw an exception if someone tries to access a property that starts with an underscore:

const handler = { get(target, property) { if (property[0] === '_') { throw new Error(`${property} is a private property`); } return target[property]; }
} const proxyPerson = new Proxy(person, handler); console.log(proxyPerson._ssn);

If you run this code, you should see the following error message on your console:

Error: _ssn is a private property

The set() Trap

Now, let's take a look at the set() trap, which controls the behavior when setting values on a target object's property. To give you a clear example, let's assume that when you define a person object the value of the age should be in the range of 0 to 150.

As you may already know, JavaScript is a dynamic typing language, which means a variable can hold any type of value (string, number, bool, etc.) at any given time. So normally it's very difficult to enforce the age property to just hold integers. However, with proxies, we can control the way we set the values for properties:

const handler = { set(target, property, value) { if (property === 'age') { if (!(typeof value === 'number')) { throw new Error('Age should be a number'); } if (value < 0 || value > 150) { throw new Error("Age value should be in between 0 and 150"); } } target[property] = value; }
}; const proxyPerson = new Proxy(person, handler);
proxyPerson.age = 170;

As you can see in this code, the set() trap accepts three parameters, which are:

  • target: The target object that the proxy attached to
  • property: The name of the property being set
  • value: The value which is assigned to the property

In this trap, we have checked if the property name is age, and if so, if it's also a number and value is between 0 and 150 - throwing an error if it's not.

When you run this code, you should see the following error message on the console:

Error: Age value should be in between 0 and 150

Also, you can try assigning a string value and see if it throws an error.

The deleteProperty() Trap

Now let's move on to the deleteProperty() trap which will be triggered when you try to delete a property from an object:

const handler = { deleteProperty(target, property) { console.log('You have deleted', property); delete target[property]; }
}; const proxyPerson = new Proxy(person, handler); delete proxyPerson.age;

As you can see, the deleteProperty() trap also accepts the target and property parameters.

If you run this code you should see the following output:

You have deleted age

Using Proxies with Functions

The apply() Trap

The apply() trap is used to identify when a function call occurs on the proxy object. First of all, let's create a person with a first name and a last name:

const person = { firstName: 'Sherlock', lastName: 'Holmes'

Then a method to get the full name:

const getFullName = (person) => { return person.firstName + ' ' + person.lastName;

Now, let's create a proxy method which will convert the function output to uppercase letters by providing an apply() trap inside our handler:

const getFullNameProxy = new Proxy(getFullName, { apply(target, thisArg, args) { return target(...args).toUpperCase(); }
}); console.log(getFullNameProxy(person));

As you can see in this code example, the apply() trap will be called when the function is called. It accepts three parameters - target, thisArg (which is the this argument for the call), and the args, which is the list of arguments passed into the function.

We have used the apply() trap to execute the target function with the given arguments using the ES6 spread syntax and converted the result to the uppercase. So you should see the uppercase full name:


Computed Properties with Proxies

Computed properties are the properties that are calculated by performing operations on other existing properties. For an example, let's say we have a person object with the properties firstName and lastName. With this, the full name can be a combination of those properties, just like in our last example. Thus, the full name is a calculated property.

First, let's again create a person object with a first name and a last name:

const person = { firstName: 'John', lastName: 'Doe'

Then we can create a handler with the get() trap to return the calculated full name, which is achieved by creating a proxy of the person:

const handler = { get(target, property) { if (property === 'fullName') { return target.firstName + ' ' + target.lastName; } return target[property]; }
}; const proxyPerson = new Proxy(person, handler);

Now let's try accessing the full name of the proxy person:

John Doe

Using just the proxy we have created a "getter" method on the person object without having to actually change the original object itself.

Now, let's see another example that's more dynamic than what we've encountered thus far. This time instead of a returning just a property, we will return a function that is dynamically created based on the given function name.

Consider an array of people, where each object has an id of the person, name of the person and the age of the person. We need to query a person by the id, name, or age. So simply we can create few methods, getById, getByName, and getByAge. But this time we are going to take things somewhat further.

We want to create a handler that can do this for an array which may have any property. For example, if we have an array of books and each book has a property isbn, we should also be able to query this array using getByIsbn and the method should be dynamically generated on the runtime.

But for the moment let's create an array of people.

const people = [ { id: 1, name: 'John Doe', age: 21 }, { id: 2, name: 'Ann Clair', age: 24 }, { id: 3, name: 'Sherlock Holmes', age: 35 }

Now let's create a get trap to generate the dynamic function according to the function name.

const proxyPeople = new Proxy(people, { get(target, property) { if (property.startsWith('getBy')) { let prop = property.replace('getBy', '') .toLowerCase(); return function(value) { for (let i of target) { if (i[prop] === value) { return i; } } } } return target[property]; }

In this code we first check if the property name is starts with "getBy", then we remove the "getBy" from the property name, so we end up with the actual property name that we want to use to query the item. So, for example, if the property name is getById, we end up with id as the property to query by.

Now we have the property name that we want to query with, so we can return a function that accepts a value and iterate through the array to find an object with that value and on the given property.

You can try this by running the following:

console.log(proxyPeople.getByName('Ann Clair'));

The relevant person object for each call should be shown on the console:

{ id: 1, name: 'John Doe', age: 21 }
{ id: 2, name: 'Ann Clair', age: 24 }
{ id: 3, name: 'Sherlock Holmes', age: 35 }

In the first line we used proxyPeople.getById(1), which then returned the user with an id of 1. In the second line we used proxyPeople.getByName('Ann Clair'), which returned the person with the name "Ann Clair", and so on.

As an exercise for the reader, try creating your own book array with properties isbn, title, and author. Then, using similar code as above, see how you can use getByIsbn, getByTitle, and getByAuthor to retrieve items from the list.

For simplicity, in this implementation we have assumed that there is only one object with a certain value for each property. But this might not be the case in some situations, which you can then edit that method to return an array of objects which match the given query.


The source code for this article is available on GitHub as usual. Use this to compare your code if you got stuck along the tutorial.